Do you want to GO HIGHER?!

With Lifting Columns of LEANTECHNIK – No Problem!

High Speed

Tight Operating Parameters

Low Maintenance

Highest Precision

Simple Installation

See our Lifting Columns in action!
Application Example: Double Lifting Column
The Double Lifting Columns from LEANTECHNIK are efficient and conserve space. Due to separate drives, the lifting devices are independent from each other so that two systems can be operated at the same time. In addition, Lifting Columns are used in the automotive industry for fabrication systems and production-line assembly. In these systems, parts such as car doors, trunk lids or hoods are produced.

In the assembly of a Lifting system, we encountered the challenges of an assembly space that had a ceiling height of only 3.2 meters (10.5 feet). Despite the limitations of the production area, our engineers were able to install the Lifting Column successfully. In 3 seconds, the Lifting System can travel up to 1800 mm (70 inches) and handle a capacity up to 850 kg (1870 lbs ). The Gear Rack Drive, lifgo® linear 5.3 Series, each have a lifting force of 15,000 N and travel on a rack in the operational range of the Lifting Column.

Benefit from our experienced engineering team.

They are prepared to assist with design and development recommendations of cutting-edge solutions that meet your demands and requirements.

Check out our leantranspo® projects and find further information in our full catalogue.

Das sagen unsere Kunden über die Hubsäulen
„Ich liebe diese Hubsäulen! Für jeden Anwendungsfall ist etwas geboten“ Peter Müller

Marketing Manager, Muster AG

„Ich liebe diese Hubsäulen! Für jeden Anwendungsfall ist etwas geboten“ Peter Müller

Marketing Manager, Muster AG

„Ich liebe diese Hubsäulen! Für jeden Anwendungsfall ist etwas geboten“ Peter Müller

Marketing Manager, Muster AG

„Ich liebe diese Hubsäulen! Für jeden Anwendungsfall ist etwas geboten“ Peter Müller

Marketing Manager, Muster AG

You want to know more about our Lifting Columns?!

Our sales team will be happy to advise you!

Our field service representatives are available anytime for a non-binding consultation at your facility. To contact your local representative, check who is responsible for your area.

While our product development and design departments are located at our Oberhausen location, our field service representatives are available to assist you anywhere in the US.

Headquarters:

USA
LEANTECHNIK LP
2220 Northmont Parkway,
Suite 250
DULUTH GA 30096
UNITED STATES OF AMERICA
E-Mail: info@leantechnik.us
Phone: +1 770 295 2286
Web: www.leantechnik.us

USA – Michigan, Indiana, Illinois
Morrell Group, Inc.
3333 Bald Mountain Road
Auburn Hills, MI 48326
UNITED STATES OF AMERICA
E-Mail: sstearn@morrellinc.com
Phone: +1 248 373 1600
Web: www.morrell-group.com

USA – Ohio, Kentucky
Hydrotech, Inc.
10052 Commerce Park Drive
Cincinnati, OH 45246-1388
UNITED STATES OF AMERICA
E-Mail:dschaefer@hydrotech.com
Phone: +15138817000
Web: www.hydrotech.com

leantranspo® – Cutting Edge Solution

from the House of LEANTECHNIK

The development and construction of an individual leantranspo®-system integrates Gear Rack Drives – lifgo® and lean SL®, with parts, motors and steel frame structure. Individual leantranspo®-systems can be created for the most discriminate lifting applications.

leantranspo® is significant in the development and manufacture of parts and production systems.

Lifting Tables and Lifting Columns

• Press Transfer Lines

• Pick and Place Systems

• Two and Three Axis Portals and Positioning Systems

• Lift & Lower Conveyor Systems

Benefit from our experienced engineering team. They are prepared to assist with design and development recommendations of cutting-edge solutions that meet your demands and requirements.